Portable Lpg Propane Gas Hot Water Heater

Attention:

• After installing the water heater, if it doesn't work, it's likely due to high gas pressure. Try adjusting the gas pressure to around 0.40 psi and ignite again.
• When installing the water heater to connect the outlet pipe, please do not exceed the torque of 3.5N.m twist the pipe.
• Empty the water tank in cold weather to avoid any crack.

• Do not install the water heater and the exhaust pipe near any flammable or explosive items.
• Please seal the air inlet, water inlet and water outlet with the attached gasket, do not use raw material tape / PTFE tape to seal, otherwise it will cause air leakage and water leakage.

Gas Type: LPG Liquid Petroleum Gas (PROPANE)

Capacity: 6L/min (1.6 GPM), 25 degrees warm water producing rate

Galvanized pure copper tank

Digital temperature display

Working temperature: -8-45℃

Thermal input: 16KW

6L Maximum air consumption: 0.76kg/h

Thermal efficiency: ≥80%

Temperature rise: 25℃

Minimum working water pressure: 0.02MPa

Gas pressure: 2800Pa / 0.40psi

(Very important to set appropriate gas pressure, or the water heater will not ignite.)

Gas Pipe:  G 1/2''

Cold Water connection: G1/2'' tube

Hot Water connection:: G1/2''tube

Certification: CE Approved

1 Years Warranty for Parts

Automatic water ignition system, Flame failure protection device

Water & gas combination unit ,Fitted with over heating and pressure safeguard

Suitable for both summer and winter

20 min. off self-timer

Mains power not required

Electrical requirement: DC3V, Automatic electric ignition powered by two (2) size 'D' batteries (batteries not included); No electrical hook up; No standing pilot;

Packing size: 380*185*595mm

Net weight: 4.6KG

1. High efficient energy saving: the heater exchanger and main burner adopt mostly advanced energy-saving and combustion technology to decrease gas consumption and burning noise.
2. Low water-pressured startup: the water control linkage valve makes the heater start up under low water pressure and shortage areas and those living in high stairs.
3. Manifold auto protection: for the sake of your safety.
4. Ion flame inspection: to automatically shut down gas power under unexpected flameout.
5. Over water pressure protection function: to automatically decrease pressure under excessive high water pressure.
6. Controller design: both cold water and warm water can be properly controlled.
7. Magnificent thin-shaped appearance: it is designed by modern fashionable line shape.